# CIH SME Review Packet > Production-enabled study pack — update review fields only; do not modify item content in review files without authoring workflow. Generated: 2026-07-06T13:46:40.774Z Total items: 760 --- ## CIH-D1-Q001 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Exposure assessment prioritization - **Difficulty:** Easy - **Review status:** accepted ### Stem Before quantitative air sampling, an IH team ranks tasks by toxicity, frequency, and number of workers exposed. This step best describes: ### Choices - A) Analytical method validation - B) Qualitative exposure assessment / prioritization - C) Medical surveillance enrollment - D) PPE final selection only **Correct answer:** B ### Explanation Qualitative assessment uses professional judgment and available data to prioritize where quantitative measurements and controls are most needed, conserving resources for highest-risk tasks. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q002 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups - **Difficulty:** Medium - **Review status:** accepted ### Stem Workers performing the same job on the same shift with comparable tasks and controls are often grouped as a SEG for sampling. The primary benefit is: ### Choices - A) Eliminating the need for any measurements - B) Representative sampling that covers workers with similar exposures - C) Replacing hazard communication - D) Avoiding medical surveillance **Correct answer:** B ### Explanation Similar exposure groups (SEGs) allow representative monitoring: results from sampled workers can be applied to the group when tasks, controls, and materials are truly comparable. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q003 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Sampling strategy scenario - **Difficulty:** Hard - **Review status:** accepted ### Stem A solvent exposure varies widely by task duration. Which strategy most improves interpretation of a worker's true shift exposure? ### Choices - A) One 15-minute grab sample per month - B) Full-shift personal sampling on high-variability days plus task notes - C) Area sample at the roof vent only - D) Post-shift urine test without workplace data **Correct answer:** B ### Explanation Variable exposures require personal, full-shift samples tied to task documentation. Short grab samples or remote area samples may miss peak tasks or misrepresent personal dose. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q004 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives - **Difficulty:** Medium - **Review status:** accepted ### Stem When planning an exposure assessment, defining acceptable uncertainty, sample numbers, and decision criteria before sampling aligns with: ### Choices - A) Data quality objectives (DQO) / assessment planning - B) Post-incident root cause only - C) Vendor marketing claims - D) Informal visual inspection alone **Correct answer:** A ### Explanation Planning with clear objectives—what decision the data must support and what quality is needed—reduces wasted sampling and supports defensible conclusions. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q005 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Baseline vs periodic monitoring - **Difficulty:** Easy - **Review status:** accepted ### Stem After installing engineering controls for a chronic inhalation hazard, the first round of follow-up personal samples primarily confirms: ### Choices - A) Control effectiveness and new baseline exposure - B) Employee vacation schedules - C) SDS revision dates - D) Product color **Correct answer:** A ### Explanation Follow-up sampling after control changes verifies whether exposures dropped to acceptable levels and establishes a new baseline for periodic monitoring. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q006 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Professional judgment - **Difficulty:** Medium - **Review status:** accepted ### Stem In the absence of measured data for a low-volume, high-toxicity task performed twice yearly, the IH may recommend: ### Choices - A) No action until illness occurs - B) Conservative controls and targeted short-term sampling during the task - C) Eliminating all written programs - D) Relying solely on odor detection **Correct answer:** B ### Explanation Professional judgment supports precautionary controls for infrequent but high-hazard tasks, supplemented by targeted measurements when the task occurs. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q007 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Exposure matrix - **Difficulty:** Hard - **Review status:** accepted ### Stem An exposure matrix linking job titles to agents, control status, and sample results helps an organization: ### Choices - A) Track exposure history and identify data gaps across the workforce - B) Replace all regulatory obligations - C) Avoid communicating with employees - D) Store PPE invoices only **Correct answer:** A ### Explanation Matrices organize who is exposed to what, under which controls, supporting gap analysis, retrospective epidemiology, and audit readiness. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q008 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying prioritization within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Prioritization in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q009 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on similar exposure groups in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Similar exposure groups: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q010 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about qualitative vs quantitative in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm qualitative vs quantitative controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q011 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During exposure assessment strategy planning, data quality objectives is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Data quality objectives in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q012 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to prioritization under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Prioritization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q013 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying similar exposure groups within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm similar exposure groups controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q014 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on qualitative vs quantitative in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Qualitative vs quantitative in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q015 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about data quality objectives in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Data quality objectives: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q016 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During exposure assessment strategy planning, prioritization is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm prioritization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q017 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to similar exposure groups under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Similar exposure groups in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q018 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying qualitative vs quantitative within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Qualitative vs quantitative: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q019 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on data quality objectives in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm data quality objectives controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q020 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about prioritization in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Prioritization in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q021 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During exposure assessment strategy planning, similar exposure groups is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Similar exposure groups: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q022 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to qualitative vs quantitative under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm qualitative vs quantitative controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q023 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying data quality objectives within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Data quality objectives in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q024 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on prioritization in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Prioritization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q025 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about similar exposure groups in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm similar exposure groups controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q026 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During exposure assessment strategy planning, qualitative vs quantitative is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Qualitative vs quantitative in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q027 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to data quality objectives under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Data quality objectives: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q028 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying prioritization within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm prioritization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q029 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on similar exposure groups in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Similar exposure groups in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q030 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about qualitative vs quantitative in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Qualitative vs quantitative: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q031 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During exposure assessment strategy planning, data quality objectives is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm data quality objectives controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q032 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to prioritization under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Prioritization in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q033 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying similar exposure groups within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Similar exposure groups: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q034 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on qualitative vs quantitative in Exposure Assessment Strategy. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm qualitative vs quantitative controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q035 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Data quality objectives — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about data quality objectives in Exposure Assessment Strategy is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Data quality objectives in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q036 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Prioritization — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During exposure assessment strategy planning, prioritization is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Prioritization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q037 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Similar exposure groups — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to similar exposure groups under Exposure Assessment Strategy. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Exposure Assessment Strategy includes transparent documentation and follow-up to confirm similar exposure groups controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D1-Q038 - **Pack:** cih - **Type:** question - **Domain:** exposure-assessment-strategy - **Topic:** Qualitative vs quantitative — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying qualitative vs quantitative within Exposure Assessment Strategy, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Qualitative vs quantitative in Exposure Assessment Strategy requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q001 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration - **Difficulty:** Easy - **Review status:** accepted ### Stem Personal sampling pumps are typically calibrated: ### Choices - A) Once per year regardless of use - B) Before and after each sample period with a calibrated rotameter or electronic calibrator - C) Only when the battery is low - D) Using employee guesswork **Correct answer:** B ### Explanation Pre- and post-sample calibration verifies the pump maintained target flow within acceptable limits for the entire sample period. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q002 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media selection - **Difficulty:** Medium - **Review status:** accepted ### Stem Selecting sorbent tubes versus filters for an organic vapor depends primarily on: ### Choices - A) Color of the worker uniform - B) Analytical method requirements, vapor pressure, and expected concentration range - C) Availability of free pens - D) Weather forecast only **Correct answer:** B ### Explanation Method-specific media capture the analyte without breakthrough; method documents (e.g., NIOSH NMAM concepts) define appropriate media and sample volumes. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q003 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments - **Difficulty:** Medium - **Review status:** accepted ### Stem A direct-reading PID is useful for screening volatile organic compounds but may: ### Choices - A) Identify every compound without correction factors - B) Respond to multiple VOCs and require correction factors for quantitative estimates - C) Replace laboratory analysis in all compliance situations - D) Measure noise dose **Correct answer:** B ### Explanation PIDs respond broadly to ionizable compounds; without compound-specific calibration, readings are indicative and may need lab confirmation for compliance decisions. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q004 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sampling scenario - **Difficulty:** Hard - **Review status:** accepted ### Stem During abrasive blasting in a partially enclosed booth, which sample location best represents a worker's inhalation exposure inside the respirator zone (before PPE)? ### Choices - A) Roof exhaust stack - B) Personal sample on the worker's breathing zone, outside respirator - C) Parking lot upwind - D) Inside the office break room **Correct answer:** B ### Explanation Personal breathing-zone samples outside the respirator characterize workplace air the worker would inhale without adequate respiratory protection. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q005 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Blank samples - **Difficulty:** Easy - **Review status:** accepted ### Stem Field blank samples are collected to: ### Choices - A) Increase sample volume - B) Detect contamination during handling, shipping, or storage - C) Replace calibration - D) Measure wind speed **Correct answer:** B ### Explanation Blanks travel with the batch but are not exposed to workplace air, helping distinguish field/lab contamination from true exposure. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q006 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** High-flow vs low-flow - **Difficulty:** Medium - **Review status:** accepted ### Stem Low-flow personal sampling (e.g., 0.2 L/min) is often selected when: ### Choices - A) Measuring noise - B) Collecting onto sorbent media for extended periods or reactive gases - C) Replacing WBGT monitoring - D) Sampling for gamma radiation **Correct answer:** B ### Explanation Low flow rates extend sampling duration and reduce breakthrough risk on sorbents for many gas/vapor methods. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q007 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Cyclone samplers - **Difficulty:** Hard - **Review status:** accepted ### Stem A respirable dust cyclone inlet separates particles primarily by: ### Choices - A) Chemical reaction - B) Particle aerodynamic behavior in a curving airflow stream - C) Color sorting - D) Magnetic field only **Correct answer:** B ### Explanation Cyclones use centrifugal separation so larger particles deposit while respirable fraction passes to the filter, approximating inhalable/respirable criteria. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q008 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Personal sampling volume - **Difficulty:** Medium - **Review status:** accepted ### Stem A sample is collected at 1 L/min for 480 minutes. What total air volume (liters) was sampled? ### Choices - A) 240 L - B) 720 L - C) 480 L - D) 580 L **Correct answer:** C ### Explanation Sample volume = flow rate × time = 1 L/min × 480 min = 480 L. Pre- and post-sample pump calibration checks help confirm the effective flow rate. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q009 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Area sampling volume - **Difficulty:** Medium - **Review status:** accepted ### Stem A sample is collected at 2 L/min for 240 minutes. What total air volume (liters) was sampled? ### Choices - A) 240 L - B) 720 L - C) 480 L - D) 580 L **Correct answer:** C ### Explanation Sample volume = flow rate × time = 2 L/min × 240 min = 480 L. Pre- and post-sample pump calibration checks help confirm the effective flow rate. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q010 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Low-flow pump calibration - **Difficulty:** Medium - **Review status:** accepted ### Stem A sample is collected at 0.5 L/min for 960 minutes. What total air volume (liters) was sampled? ### Choices - A) 240 L - B) 720 L - C) 480 L - D) 580 L **Correct answer:** C ### Explanation Sample volume = flow rate × time = 0.5 L/min × 960 min = 480 L. Pre- and post-sample pump calibration checks help confirm the effective flow rate. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q011 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying pump calibration within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Pump calibration in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q012 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on sample media in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sample media: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q013 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about direct-reading instruments in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm direct-reading instruments controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q014 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During air sampling and instrumentation planning, quality assurance is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Quality assurance in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q015 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to pump calibration under Air Sampling and Instrumentation. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Pump calibration: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q016 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying sample media within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm sample media controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q017 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on direct-reading instruments in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Direct-reading instruments in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q018 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about quality assurance in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Quality assurance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q019 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During air sampling and instrumentation planning, pump calibration is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm pump calibration controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q020 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to sample media under Air Sampling and Instrumentation. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Sample media in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q021 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying direct-reading instruments within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Direct-reading instruments: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q022 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on quality assurance in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm quality assurance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q023 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about pump calibration in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Pump calibration in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q024 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During air sampling and instrumentation planning, sample media is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sample media: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q025 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to direct-reading instruments under Air Sampling and Instrumentation. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm direct-reading instruments controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q026 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying quality assurance within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Quality assurance in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q027 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on pump calibration in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Pump calibration: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q028 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about sample media in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm sample media controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q029 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During air sampling and instrumentation planning, direct-reading instruments is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Direct-reading instruments in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q030 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to quality assurance under Air Sampling and Instrumentation. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Quality assurance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q031 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying pump calibration within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm pump calibration controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q032 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on sample media in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Sample media in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q033 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about direct-reading instruments in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Direct-reading instruments: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q034 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During air sampling and instrumentation planning, quality assurance is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm quality assurance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q035 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Pump calibration — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to pump calibration under Air Sampling and Instrumentation. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Pump calibration in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q036 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Sample media — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying sample media within Air Sampling and Instrumentation, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sample media: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q037 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Direct-reading instruments — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on direct-reading instruments in Air Sampling and Instrumentation. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Air Sampling and Instrumentation includes transparent documentation and follow-up to confirm direct-reading instruments controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D2-Q038 - **Pack:** cih - **Type:** question - **Domain:** air-sampling - **Topic:** Quality assurance — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about quality assurance in Air Sampling and Instrumentation is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Quality assurance in Air Sampling and Instrumentation requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q001 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method LOD - **Difficulty:** Medium - **Review status:** accepted ### Stem The limit of detection (LOD) for an analytical method indicates: ### Choices - A) The highest concentration the lab can measure - B) The lowest concentration distinguishable from blank with stated confidence - C) OSHA penalty amounts - D) Pump battery life **Correct answer:** B ### Explanation LOD reflects method sensitivity; results below LOD should be reported and interpreted cautiously, often as less-than values. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q002 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation - **Difficulty:** Easy - **Review status:** accepted ### Stem Using an accredited laboratory for IH samples primarily provides assurance of: ### Choices - A) Free shipping - B) Documented quality systems, method performance, and traceability - C) Guaranteed zero exposure - D) Elimination of PPE **Correct answer:** B ### Explanation Accreditation (e.g., ISO/IEC 17025 concepts) verifies the lab follows quality management and validated methods. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q003 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Solvent desorption - **Difficulty:** Medium - **Review status:** accepted ### Stem After collecting organic vapors on charcoal tubes, the laboratory typically: ### Choices - A) Weighs the tube without extraction - B) Desorbs analytes with solvent and analyzes by GC or similar - C) Counts radioactive decays only - D) Measures pH of the tube **Correct answer:** B ### Explanation Solvent desorption followed by chromatographic analysis is a common approach for many adsorbent tube methods. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q004 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Matrix interference - **Difficulty:** Hard - **Review status:** accepted ### Stem High humidity during silica sampling may require method notes because moisture can: ### Choices - A) Improve filter capture only - B) Affect sample handling, weigh stability, or interferences in analysis - C) Eliminate respirable fraction - D) Replace calibration **Correct answer:** B ### Explanation Environmental conditions can affect gravimetric results and analytical steps; methods specify controls and corrections. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q005 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Split samples - **Difficulty:** Medium - **Review status:** accepted ### Stem Splitting a sample for analysis by two methods is justified when: ### Choices - A) The client wants duplicate invoices - B) Verification of an unusual result or method comparison is needed - C) The pump failed calibration - D) No chain of custody exists **Correct answer:** B ### Explanation Split samples support QA when results are unexpected or when validating a new method against a reference technique. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q006 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Gravimetric analysis - **Difficulty:** Easy - **Review status:** accepted ### Stem Gravimetric dust analysis determines mass by: ### Choices - A) Color matching - B) Pre- and post-sample filter weighing under controlled conditions - C) Employee survey - D) Sound level meter **Correct answer:** B ### Explanation Filter tare and post-sample weights, with blank correction, yield collected mass for concentration calculations. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q007 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Reporting units - **Difficulty:** Hard - **Review status:** accepted ### Stem A lab reports benzene as 0.8 ppm from a charcoal tube sample. The IH converts to mg/m³ primarily to: ### Choices - A) Compare against mass-based criteria or internal risk metrics using molecular weight and molar volume - B) Measure noise - C) Calculate WBGT - D) Determine fire class **Correct answer:** A ### Explanation Unit conversion uses ideal-gas relationships at stated temperature/pressure when comparing to mass-based exposure limits or risk models. **References:** niosh-nmam: NIOSH Manual of Analytical Methods ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q008 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying method selection within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Method selection in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q009 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on lod/loq in Analytical Chemistry. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to LOD/LOQ: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q010 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about blank correction in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm blank correction controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q011 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During analytical chemistry planning, lab accreditation is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Lab accreditation in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q012 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to method selection under Analytical Chemistry. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Method selection: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q013 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying lod/loq within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm lod/loq controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q014 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on blank correction in Analytical Chemistry. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Blank correction in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q015 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about lab accreditation in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Lab accreditation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q016 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During analytical chemistry planning, method selection is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm method selection controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q017 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to lod/loq under Analytical Chemistry. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation LOD/LOQ in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q018 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying blank correction within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Blank correction: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q019 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on lab accreditation in Analytical Chemistry. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm lab accreditation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q020 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about method selection in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Method selection in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q021 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During analytical chemistry planning, lod/loq is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to LOD/LOQ: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q022 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to blank correction under Analytical Chemistry. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm blank correction controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q023 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying lab accreditation within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Lab accreditation in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q024 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on method selection in Analytical Chemistry. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Method selection: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q025 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about lod/loq in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm lod/loq controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q026 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During analytical chemistry planning, blank correction is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Blank correction in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q027 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to lab accreditation under Analytical Chemistry. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Lab accreditation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q028 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying method selection within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm method selection controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q029 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on lod/loq in Analytical Chemistry. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation LOD/LOQ in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q030 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about blank correction in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Blank correction: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q031 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During analytical chemistry planning, lab accreditation is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm lab accreditation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q032 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to method selection under Analytical Chemistry. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Method selection in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q033 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying lod/loq within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to LOD/LOQ: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q034 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on blank correction in Analytical Chemistry. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm blank correction controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q035 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Lab accreditation — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about lab accreditation in Analytical Chemistry is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Lab accreditation in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q036 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Method selection — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During analytical chemistry planning, method selection is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Method selection: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q037 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** LOD/LOQ — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to lod/loq under Analytical Chemistry. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Analytical Chemistry includes transparent documentation and follow-up to confirm lod/loq controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D3-Q038 - **Pack:** cih - **Type:** question - **Domain:** analytical-chemistry - **Topic:** Blank correction — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying blank correction within Analytical Chemistry, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Blank correction in Analytical Chemistry requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q001 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry - **Difficulty:** Easy - **Review status:** accepted ### Stem Which route of entry is most commonly associated with inhalation of solvent vapors in a poorly ventilated room? ### Choices - A) Dermal only - B) Inhalation - C) Ingestion from hand-to-mouth always primary - D) Injection **Correct answer:** B ### Explanation Volatile liquids generate inhalable vapors; inhalation often dominates unless significant skin contact with liquid occurs. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q002 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response - **Difficulty:** Medium - **Review status:** accepted ### Stem A steep dose-response curve for an industrial chemical implies: ### Choices - A) Small increases in dose may produce disproportionately larger health effects - B) The substance is always safe at any level - C) Only dermal effects occur - D) No need for controls **Correct answer:** A ### Explanation Steep curves indicate high potency—control measures and low exposure targets are especially important. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q003 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Synergistic effects - **Difficulty:** Hard - **Review status:** accepted ### Stem Workers exposed to noise and ototoxic solvents may experience greater hearing loss than either agent alone. This illustrates: ### Choices - A) Synergistic interaction - B) Antagonism only - C) No interaction possible - D) Radiation weighting **Correct answer:** A ### Explanation Combined exposures can interact synergistically; IH assessments should consider mixtures and multiple stressors. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q004 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organ - **Difficulty:** Medium - **Review status:** accepted ### Stem Chronic cadmium exposure is primarily associated with toxicity to the: ### Choices - A) Kidneys and lungs - B) Hair only - C) Finger nails exclusively - D) No organs **Correct answer:** A ### Explanation Cadmium accumulates and affects renal and pulmonary systems among other endpoints; exposure control and biomonitoring may apply where regulated. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q005 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** LD50 concept - **Difficulty:** Easy - **Review status:** accepted ### Stem In toxicology, LD50 commonly refers to: ### Choices - A) The dose lethal to 50% of test animals under stated conditions - B) Legal dose for workers daily - C) Lowest detectable sound - D) Light intensity **Correct answer:** A ### Explanation LD50 is an acute toxicity metric from standardized tests; it informs hazard classification but does not directly set occupational exposure limits. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q006 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Sensitizer - **Difficulty:** Medium - **Review status:** accepted ### Stem A respiratory sensitizer such as certain isocyanates requires IH programs to emphasize: ### Choices - A) Prevention of initial and especially subsequent exposures that trigger sensitization - B) Only annual vision tests - C) Elimination of all labels - D) Increased exposure to build tolerance unsafely **Correct answer:** A ### Explanation Sensitization can occur at low levels after initial exposure; strict control, medical surveillance, and prompt response to symptoms are critical. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q007 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Toxicokinetics - **Difficulty:** Hard - **Review status:** accepted ### Stem Half-life of a chemical in the body influences: ### Choices - A) How long biomonitoring samples reflect recent vs cumulative exposure - B) Wind direction - C) Hood face area only - D) Fire extinguisher color **Correct answer:** A ### Explanation Elimination kinetics affect interpretation of blood, urine, or breath biomarkers for exposure assessment. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q008 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying routes of entry within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Routes of entry in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q009 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on dose-response in Toxicology. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dose-response: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q010 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about target organs in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm target organs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q011 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During toxicology planning, mixtures is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mixtures in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q012 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to routes of entry under Toxicology. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Routes of entry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q013 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying dose-response within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm dose-response controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q014 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on target organs in Toxicology. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Target organs in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q015 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about mixtures in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mixtures: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q016 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During toxicology planning, routes of entry is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm routes of entry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q017 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to dose-response under Toxicology. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dose-response in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q018 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying target organs within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Target organs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q019 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on mixtures in Toxicology. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm mixtures controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q020 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about routes of entry in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Routes of entry in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q021 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During toxicology planning, dose-response is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dose-response: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q022 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to target organs under Toxicology. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm target organs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q023 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying mixtures within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mixtures in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q024 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on routes of entry in Toxicology. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Routes of entry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q025 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about dose-response in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm dose-response controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q026 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During toxicology planning, target organs is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Target organs in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q027 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to mixtures under Toxicology. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mixtures: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q028 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying routes of entry within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm routes of entry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q029 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on dose-response in Toxicology. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dose-response in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q030 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about target organs in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Target organs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q031 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During toxicology planning, mixtures is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm mixtures controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q032 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to routes of entry under Toxicology. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Routes of entry in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q033 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying dose-response within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dose-response: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q034 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on target organs in Toxicology. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm target organs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q035 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Mixtures — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about mixtures in Toxicology is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mixtures in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q036 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Routes of entry — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During toxicology planning, routes of entry is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Routes of entry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q037 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Dose-response — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to dose-response under Toxicology. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Toxicology includes transparent documentation and follow-up to confirm dose-response controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D4-Q038 - **Pack:** cih - **Type:** question - **Domain:** toxicology - **Topic:** Target organs — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying target organs within Toxicology, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Target organs in Toxicology requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q001 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Exchange rate - **Difficulty:** Medium - **Review status:** accepted ### Stem OSHA hearing conservation uses a 5 dB exchange rate for time-weighted average calculations, meaning: ### Choices - A) Allowable time doubles/halves with 5 dB change relative to criterion level concepts - B) Every 5 dB requires ear plugs only one day per week - C) Noise cannot be measured - D) Vibration is measured in dBA **Correct answer:** A ### Explanation Exchange rate defines how duration adjusts with level changes in dose calculations for hearing conservation programs. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q002 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation - **Difficulty:** Easy - **Review status:** accepted ### Stem A hearing conservation program typically includes monitoring, audiometric testing, hearing protection, training, and: ### Choices - A) Recordkeeping - B) Elimination of all machinery - C) Mandatory music headphones - D) No engineering review **Correct answer:** A ### Explanation OSHA 1910.95 elements include noise monitoring, hearing tests, PPE, training, and records when exposures exceed action level. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q003 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls for noise - **Difficulty:** Medium - **Review status:** accepted ### Stem The most sustainable long-term noise reduction at source often involves: ### Choices - A) Engineering controls such as enclosures, damping, or maintenance - B) Posting "quiet" signs only - C) Removing audiometric testing - D) Increasing production speed unconditionally **Correct answer:** A ### Explanation Hierarchy of controls prioritizes source and path interventions before relying on hearing protection alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q004 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hand-arm vibration - **Difficulty:** Hard - **Review status:** accepted ### Stem Prolonged use of vibrating hand tools increases risk of: ### Choices - A) Hand-arm vibration syndrome (HAVS) / vascular and neurological effects - B) Improved grip strength only - C) Better hearing - D) Reduced need for gloves **Correct answer:** A ### Explanation HAVS includes vascular blanching and neurological symptoms; exposure time, tool vibration magnitude, and anti-vibration practices matter. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q005 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Impulse noise - **Difficulty:** Medium - **Review status:** accepted ### Stem Impulse or impact noise from hammering may require assessment beyond steady noise because: ### Choices - A) Peak levels can exceed steady readings and contribute to hearing risk - B) Impulse noise cannot be measured - C) It is always below 50 dBA - D) It replaces the need for PPE in all cases **Correct answer:** A ### Explanation Peak pressure and frequency content of impulses may warrant separate evaluation and control strategies. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q006 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Noise survey scenario - **Difficulty:** Hard - **Review status:** accepted ### Stem A worker moves between a 95 dBA press area (2 hr) and 80 dBA assembly (6 hr). The best exposure metric for hearing conservation is: ### Choices - A) Maximum instantaneous reading only - B) Noise dosimeter TWA over the full shift - C) Average of area labels - D) Worker subjective guess **Correct answer:** B ### Explanation Dosimetry integrates time in each level to compute an 8-hour TWA equivalent exposure for program decisions. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q007 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Octave bands - **Difficulty:** Easy - **Review status:** accepted ### Stem Octave-band analysis helps select hearing protection because: ### Choices - A) Attenuation varies by frequency and must match the noise spectrum - B) It measures temperature - C) It replaces fit-testing - D) It determines SDS revision **Correct answer:** A ### Explanation Hearing protectors attenuate differently across frequencies; spectrum analysis supports appropriate protector selection. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q008 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Noise level combination - **Difficulty:** Hard - **Review status:** accepted ### Stem Two equal-duration noise sources measure 85 dBA and 85 dBA at a worker location. Using standard decibel combination rules for uncorrelated sources, the combined level is approximately: ### Choices - A) 170 dBA - B) 85 dBA - C) 88 dBA - D) 85 dBA **Correct answer:** C ### Explanation Decibel levels combine logarithmically, not arithmetically. Equal levels increase combined sound by ~3 dB; unequal levels are dominated by the louder source. Approximate combined level here: 88 dBA. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q009 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Noise level combination - **Difficulty:** Hard - **Review status:** accepted ### Stem Two equal-duration noise sources measure 90 dBA and 80 dBA at a worker location. Using standard decibel combination rules for uncorrelated sources, the combined level is approximately: ### Choices - A) 170 dBA - B) 90 dBA - C) 90 dBA - D) 85 dBA **Correct answer:** C ### Explanation Decibel levels combine logarithmically, not arithmetically. Equal levels increase combined sound by ~3 dB; unequal levels are dominated by the louder source. Approximate combined level here: 90 dBA. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q010 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Noise level combination - **Difficulty:** Hard - **Review status:** accepted ### Stem Two equal-duration noise sources measure 95 dBA and 95 dBA at a worker location. Using standard decibel combination rules for uncorrelated sources, the combined level is approximately: ### Choices - A) 190 dBA - B) 95 dBA - C) 98 dBA - D) 95 dBA **Correct answer:** C ### Explanation Decibel levels combine logarithmically, not arithmetically. Equal levels increase combined sound by ~3 dB; unequal levels are dominated by the louder source. Approximate combined level here: 98 dBA. **References:** ansi-s12-noise: ANSI/ASA Noise Measurement Concepts; niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q011 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying dba measurement within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation dBA measurement in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q012 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on hearing conservation in Noise and Vibration. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Hearing conservation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q013 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about engineering controls in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm engineering controls controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q014 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During noise and vibration planning, dosimetry is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dosimetry in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q015 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to dba measurement under Noise and Vibration. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to dBA measurement: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q016 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying hearing conservation within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm hearing conservation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q017 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on engineering controls in Noise and Vibration. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Engineering controls in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q018 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about dosimetry in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dosimetry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q019 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During noise and vibration planning, dba measurement is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm dba measurement controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q020 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to hearing conservation under Noise and Vibration. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Hearing conservation in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q021 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying engineering controls within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Engineering controls: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q022 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on dosimetry in Noise and Vibration. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm dosimetry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q023 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about dba measurement in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation dBA measurement in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q024 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During noise and vibration planning, hearing conservation is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Hearing conservation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q025 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to engineering controls under Noise and Vibration. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm engineering controls controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q026 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying dosimetry within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dosimetry in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q027 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on dba measurement in Noise and Vibration. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to dBA measurement: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q028 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about hearing conservation in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm hearing conservation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q029 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During noise and vibration planning, engineering controls is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Engineering controls in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q030 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to dosimetry under Noise and Vibration. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dosimetry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q031 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying dba measurement within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm dba measurement controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q032 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on hearing conservation in Noise and Vibration. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Hearing conservation in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q033 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about engineering controls in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Engineering controls: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q034 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During noise and vibration planning, dosimetry is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm dosimetry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q035 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** dBA measurement — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to dba measurement under Noise and Vibration. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation dBA measurement in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q036 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Hearing conservation — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying hearing conservation within Noise and Vibration, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Hearing conservation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q037 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Engineering controls — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on engineering controls in Noise and Vibration. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Noise and Vibration includes transparent documentation and follow-up to confirm engineering controls controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D5-Q038 - **Pack:** cih - **Type:** question - **Domain:** noise-vibration - **Topic:** Dosimetry — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about dosimetry in Noise and Vibration is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dosimetry in Noise and Vibration requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q001 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Hierarchy of controls - **Difficulty:** Easy - **Review status:** accepted ### Stem Replacing a toxic solvent with a less hazardous one is an example of: ### Choices - A) Substitution - B) Administrative controls only - C) PPE only - D) Post-incident analysis only **Correct answer:** A ### Explanation Substitution eliminates or reduces the hazard at the source, preferred when feasible over relying on PPE. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q002 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust ventilation - **Difficulty:** Medium - **Review status:** accepted ### Stem The purpose of local exhaust ventilation (LEV) at a contaminant generation point is to: ### Choices - A) Capture emissions before they cross the worker's breathing zone - B) Heat the room only - C) Replace general dilution entirely in every building - D) Measure blood lead **Correct answer:** A ### Explanation LEV captures at the source, minimizing the amount dispersed into the workspace compared to general ventilation alone. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q003 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation limits - **Difficulty:** Hard - **Review status:** accepted ### Stem Dilution ventilation alone is often inadequate for high-toxicity, high-generation-rate contaminants because: ### Choices - A) Required airflow may be impractical and worker exposure can remain high near the source - B) It always removes 100% instantly - C) It eliminates need for maintenance - D) It measures WBGT **Correct answer:** A ### Explanation Without source capture, large volumes of makeup air may still leave harmful breathing-zone concentrations. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q004 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** LEV maintenance - **Difficulty:** Medium - **Review status:** accepted ### Stem A drop in hood capture effectiveness after filter loading indicates need for: ### Choices - A) Inspection, filter change, and airflow verification - B) Removing the hood - C) Disabling alarms - D) Only PPE without investigation **Correct answer:** A ### Explanation Ventilation systems require periodic airflow checks and maintenance to maintain design capture velocity and pressure. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q005 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Confined space ventilation - **Difficulty:** Hard - **Review status:** accepted ### Stem Before entry into a space with potential atmospheric hazards, ventilation should: ### Choices - A) Be used as part of a permit program with continuous monitoring where required - B) Replace all gas testing - C) Never be used - D) Run only after entry **Correct answer:** A ### Explanation Forced ventilation may reduce hazards but must complement testing, permits, and rescue planning per OSHA confined space requirements. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q006 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity concept - **Difficulty:** Easy - **Review status:** accepted ### Stem Capture velocity refers to: ### Choices - A) Air velocity at the contaminant source needed to draw contaminants into the hood - B) Worker walking speed - C) Sound pressure level - D) Radiation dose rate only **Correct answer:** A ### Explanation Adequate inward airflow at the generation point prevents release into the room; requirements depend on contaminant behavior. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q007 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Control scenario - **Difficulty:** Medium - **Review status:** accepted ### Stem Welding fume control hierarchy: portable fume extractor at the arc plus improved general ventilation represents primarily: ### Choices - A) Engineering controls at source and path - B) Administrative controls only - C) Elimination - D) Medical treatment **Correct answer:** A ### Explanation Source capture for welding fume is a standard engineering approach, supplemented by room air exchange as needed. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q008 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust hood face velocity - **Difficulty:** Medium - **Review status:** accepted ### Stem A slot hood opening is 3 ft wide × 2 ft high. Exhaust airflow is 900 cfm. What is the average face velocity (fpm)? ### Choices - A) 105 fpm - B) 150 fpm - C) 195 fpm - D) 180 fpm **Correct answer:** B ### Explanation Face velocity = Q / A = 900 cfm ÷ (3 × 2 ft²) = 150 fpm. Many capture designs target 80–200 fpm depending on contaminant generation rate. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q009 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust hood face velocity - **Difficulty:** Medium - **Review status:** accepted ### Stem A slot hood opening is 4 ft wide × 2.5 ft high. Exhaust airflow is 1200 cfm. What is the average face velocity (fpm)? ### Choices - A) 84 fpm - B) 120 fpm - C) 156 fpm - D) 185 fpm **Correct answer:** B ### Explanation Face velocity = Q / A = 1200 cfm ÷ (4 × 2.5 ft²) = 120 fpm. Many capture designs target 80–200 fpm depending on contaminant generation rate. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q010 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust hood face velocity - **Difficulty:** Medium - **Review status:** accepted ### Stem A slot hood opening is 2 ft wide × 1.5 ft high. Exhaust airflow is 360 cfm. What is the average face velocity (fpm)? ### Choices - A) 84 fpm - B) 120 fpm - C) 156 fpm - D) 103 fpm **Correct answer:** B ### Explanation Face velocity = Q / A = 360 cfm ÷ (2 × 1.5 ft²) = 120 fpm. Many capture designs target 80–200 fpm depending on contaminant generation rate. **References:** acgih-public-concepts: Public IH Ventilation Concepts; osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q011 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying local exhaust within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Local exhaust in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q012 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on dilution ventilation in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dilution ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q013 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about capture velocity in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm capture velocity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q014 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During ventilation and engineering controls planning, maintenance is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Maintenance in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q015 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to local exhaust under Ventilation and Engineering Controls. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Local exhaust: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q016 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying dilution ventilation within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm dilution ventilation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q017 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on capture velocity in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Capture velocity in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q018 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about maintenance in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Maintenance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q019 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During ventilation and engineering controls planning, local exhaust is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm local exhaust controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q020 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to dilution ventilation under Ventilation and Engineering Controls. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dilution ventilation in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q021 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying capture velocity within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Capture velocity: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q022 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on maintenance in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm maintenance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q023 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about local exhaust in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Local exhaust in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q024 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During ventilation and engineering controls planning, dilution ventilation is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dilution ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q025 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to capture velocity under Ventilation and Engineering Controls. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm capture velocity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q026 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying maintenance within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Maintenance in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q027 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on local exhaust in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Local exhaust: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q028 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about dilution ventilation in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm dilution ventilation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q029 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During ventilation and engineering controls planning, capture velocity is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Capture velocity in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q030 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to maintenance under Ventilation and Engineering Controls. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Maintenance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q031 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying local exhaust within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm local exhaust controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q032 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on dilution ventilation in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dilution ventilation in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q033 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about capture velocity in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Capture velocity: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q034 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During ventilation and engineering controls planning, maintenance is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm maintenance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q035 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Local exhaust — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to local exhaust under Ventilation and Engineering Controls. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Local exhaust in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q036 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Dilution ventilation — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying dilution ventilation within Ventilation and Engineering Controls, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dilution ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q037 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Capture velocity — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on capture velocity in Ventilation and Engineering Controls. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ventilation and Engineering Controls includes transparent documentation and follow-up to confirm capture velocity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D6-Q038 - **Pack:** cih - **Type:** question - **Domain:** ventilation-engineering-controls - **Topic:** Maintenance — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about maintenance in Ventilation and Engineering Controls is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Maintenance in Ventilation and Engineering Controls requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q001 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat acclimatization - **Difficulty:** Easy - **Review status:** accepted ### Stem Heat acclimatization for new workers in hot environments should involve: ### Choices - A) Gradual increase in exposure duration and workload with hydration and monitoring - B) Immediate maximum exertion on day one - C) Elimination of water breaks - D) Heavy clothing layers **Correct answer:** A ### Explanation Gradual exposure allows physiological adaptation; NIOSH and OSHA heat guidance emphasize acclimatization schedules. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q002 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress - **Difficulty:** Medium - **Review status:** accepted ### Stem Cold stress monitoring should consider wind because wind: ### Choices - A) Increases convective heat loss from exposed skin - B) Eliminates hypothermia risk - C) Replaces need for gloves - D) Measures only humidity **Correct answer:** A ### Explanation Wind chill effects increase heat loss; dress, shelter, and work/rest planning should account for combined cold and wind. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q003 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Hydration - **Difficulty:** Easy - **Review status:** accepted ### Stem In hot jobs, encouraging regular water intake helps prevent: ### Choices - A) Dehydration contributing to heat illness - B) Hearing loss - C) Radiation exposure - D) Chemical burns from SDS **Correct answer:** A ### Explanation Maintaining hydration supports thermoregulation; urine color and supervisor checks are common field indicators. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q004 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat illness recognition - **Difficulty:** Medium - **Review status:** accepted ### Stem Confusion and hot dry skin in extreme heat may indicate: ### Choices - A) Heat stroke — a medical emergency requiring immediate cooling and EMS - B) Normal productivity - C) Need for more caffeine only - D) Low noise exposure **Correct answer:** A ### Explanation Heat stroke involves central nervous system dysfunction; rapid cooling and emergency response are critical. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q005 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work-rest scheduling - **Difficulty:** Hard - **Review status:** accepted ### Stem Work-rest cycles in high WBGT conditions primarily reduce: ### Choices - A) Core temperature rise and cardiovascular strain - B) Need for any training - C) Legal obligations - D) Analytical LOD **Correct answer:** A ### Explanation Scheduled breaks in cool areas allow physiological recovery when environmental controls cannot fully reduce heat stress. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q006 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Radiant heat - **Difficulty:** Medium - **Review status:** accepted ### Stem Black globe temperature measurement is useful because it captures: ### Choices - A) Radiant heat load from surfaces and sun - B) Noise dose - C) VOC concentration - D) Alpha radiation only **Correct answer:** A ### Explanation Globe thermometers integrate radiant exchange, important near furnaces, asphalt, or solar loads. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q007 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold PPE - **Difficulty:** Easy - **Review status:** accepted ### Stem Layered clothing for cold environments works by: ### Choices - A) Trapping insulating air and allowing moisture management - B) Increasing sweat retention against skin always - C) Replacing hazard assessment - D) Eliminating buddy system **Correct answer:** A ### Explanation Layering adjusts insulation and moisture transport; extremity protection and scheduled warming breaks reduce frostbite risk. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q008 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** WBGT outdoor approximation - **Difficulty:** Hard - **Review status:** accepted ### Stem Outdoor WBGT is often approximated from dry-bulb 90°F, natural wet-bulb 78°F, and black globe 95°F. Which value is closest to the simplified outdoor WBGT? ### Choices - A) 79°F - B) 84°F - C) 89°F - D) 90°F **Correct answer:** B ### Explanation Outdoor WBGT combines wet-bulb, dry-bulb, and globe temperatures with weighting that emphasizes evaporative cooling stress. The approximate WBGT for this scenario is about 84°F. Work/rest schedules should follow heat stress management plans. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q009 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** WBGT outdoor approximation - **Difficulty:** Hard - **Review status:** accepted ### Stem Outdoor WBGT is often approximated from dry-bulb 85°F, natural wet-bulb 75°F, and black globe 88°F. Which value is closest to the simplified outdoor WBGT? ### Choices - A) 75°F - B) 80°F - C) 85°F - D) 85°F **Correct answer:** B ### Explanation Outdoor WBGT combines wet-bulb, dry-bulb, and globe temperatures with weighting that emphasizes evaporative cooling stress. The approximate WBGT for this scenario is about 80°F. Work/rest schedules should follow heat stress management plans. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q010 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** WBGT outdoor approximation - **Difficulty:** Hard - **Review status:** accepted ### Stem Outdoor WBGT is often approximated from dry-bulb 95°F, natural wet-bulb 80°F, and black globe 100°F. Which value is closest to the simplified outdoor WBGT? ### Choices - A) 82°F - B) 87°F - C) 92°F - D) 95°F **Correct answer:** B ### Explanation Outdoor WBGT combines wet-bulb, dry-bulb, and globe temperatures with weighting that emphasizes evaporative cooling stress. The approximate WBGT for this scenario is about 87°F. Work/rest schedules should follow heat stress management plans. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q011 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying heat stress indices within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Heat stress indices in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q012 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on cold stress in Thermal Stress. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cold stress: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q013 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about acclimatization in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm acclimatization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q014 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During thermal stress planning, work/rest schedules is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Work/rest schedules in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q015 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to heat stress indices under Thermal Stress. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Heat stress indices: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q016 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying cold stress within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm cold stress controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q017 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on acclimatization in Thermal Stress. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Acclimatization in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q018 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about work/rest schedules in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Work/rest schedules: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q019 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During thermal stress planning, heat stress indices is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm heat stress indices controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q020 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to cold stress under Thermal Stress. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Cold stress in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q021 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying acclimatization within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Acclimatization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q022 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on work/rest schedules in Thermal Stress. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm work/rest schedules controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q023 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about heat stress indices in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Heat stress indices in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q024 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During thermal stress planning, cold stress is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cold stress: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q025 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to acclimatization under Thermal Stress. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm acclimatization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q026 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying work/rest schedules within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Work/rest schedules in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q027 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on heat stress indices in Thermal Stress. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Heat stress indices: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q028 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about cold stress in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm cold stress controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q029 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During thermal stress planning, acclimatization is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Acclimatization in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q030 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to work/rest schedules under Thermal Stress. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Work/rest schedules: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q031 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying heat stress indices within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm heat stress indices controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q032 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on cold stress in Thermal Stress. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Cold stress in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q033 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about acclimatization in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Acclimatization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q034 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During thermal stress planning, work/rest schedules is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm work/rest schedules controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q035 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Heat stress indices — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to heat stress indices under Thermal Stress. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Heat stress indices in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q036 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Cold stress — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying cold stress within Thermal Stress, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cold stress: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q037 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Acclimatization — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on acclimatization in Thermal Stress. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Thermal Stress includes transparent documentation and follow-up to confirm acclimatization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D7-Q038 - **Pack:** cih - **Type:** question - **Domain:** thermal-stress - **Topic:** Work/rest schedules — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about work/rest schedules in Thermal Stress is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Work/rest schedules in Thermal Stress requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q001 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** NIOSH lifting equation concept - **Difficulty:** Medium - **Review status:** accepted ### Stem The revised NIOSH lifting equation helps evaluate manual lifting by considering load weight, horizontal distance, vertical height, asymmetry, frequency, and: ### Choices - A) Coupling / grip quality - B) Hair color - C) Shift name only - D) Building age **Correct answer:** A ### Explanation The equation produces a recommended weight limit adjusted for task variables; coupling quality is one multiplier. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q002 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** MSD risk factors - **Difficulty:** Easy - **Review status:** accepted ### Stem Awkward postures, forceful exertions, repetition, and static positions are primary risk factors for: ### Choices - A) Work-related musculoskeletal disorders - B) Ionizing radiation sickness only - C) Hearing threshold shift only - D) Heat stroke exclusively **Correct answer:** A ### Explanation Ergonomic assessments target physical stressors that accumulate into MSDs over time. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q003 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation - **Difficulty:** Medium - **Review status:** accepted ### Stem Job rotation as an administrative control should: ### Choices - A) Rotate among jobs that do not use the same muscle groups excessively without reducing total exposure - B) Increase repetition on one task - C) Replace all engineering fixes mandatorily - D) Eliminate training **Correct answer:** A ### Explanation Rotation must actually vary physical demands; rotating between similar high-risk tasks may not reduce overall MSD risk. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q004 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Display height - **Difficulty:** Easy - **Review status:** accepted ### Stem For seated computer work, monitor top-of-screen near eye level helps maintain: ### Choices - A) Neutral neck posture - B) Maximum wrist extension - C) Loudest keyboard force - D) Standing only posture **Correct answer:** A ### Explanation Neutral head and neck alignment reduces static loading during visual tasks. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q005 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Force reduction - **Difficulty:** Hard - **Review status:** accepted ### Stem Power assist tools on an assembly line primarily reduce: ### Choices - A) Manual force requirements and associated MSD risk - B) Need for any supervision - C) All chemical exposures automatically - D) Fire code compliance **Correct answer:** A ### Explanation Mechanical assists lower exertion; they complement but do not replace evaluation of posture and repetition. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q006 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Ergo scenario - **Difficulty:** Medium - **Review status:** accepted ### Stem Workers report hand numbness after vibrating sanders and forceful gripping. The IH/ergonomist should prioritize: ### Choices - A) Tool vibration magnitude, grip force, gloves, and job redesign - B) Only changing lunch menu - C) Removing all PPE - D) Increasing shift length **Correct answer:** A ### Explanation Combined vibration and force stress nerves and vessels; engineering and administrative controls plus medical referral may be needed. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q007 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Participatory ergonomics - **Difficulty:** Hard - **Review status:** accepted ### Stem Involving employees in ergonomic improvement teams typically improves: ### Choices - A) Hazard identification and control adoption - B) Secrecy of hazards - C) Resistance to all changes always - D) Elimination of documentation **Correct answer:** A ### Explanation Worker input surfaces practical constraints and increases buy-in for redesigned tools, heights, and schedules. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q008 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying musculoskeletal risk within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Musculoskeletal risk in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q009 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on lifting limits in Ergonomics. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Lifting limits: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q010 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about workstation design in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm workstation design controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q011 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During ergonomics planning, job rotation is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Job rotation in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q012 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to musculoskeletal risk under Ergonomics. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Musculoskeletal risk: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q013 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying lifting limits within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm lifting limits controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q014 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on workstation design in Ergonomics. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Workstation design in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q015 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about job rotation in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Job rotation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q016 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During ergonomics planning, musculoskeletal risk is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm musculoskeletal risk controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q017 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to lifting limits under Ergonomics. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Lifting limits in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q018 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying workstation design within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Workstation design: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q019 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on job rotation in Ergonomics. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm job rotation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q020 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about musculoskeletal risk in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Musculoskeletal risk in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q021 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During ergonomics planning, lifting limits is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Lifting limits: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q022 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to workstation design under Ergonomics. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm workstation design controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q023 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying job rotation within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Job rotation in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q024 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on musculoskeletal risk in Ergonomics. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Musculoskeletal risk: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q025 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about lifting limits in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm lifting limits controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q026 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During ergonomics planning, workstation design is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Workstation design in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q027 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to job rotation under Ergonomics. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Job rotation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q028 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying musculoskeletal risk within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm musculoskeletal risk controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q029 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on lifting limits in Ergonomics. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Lifting limits in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q030 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about workstation design in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Workstation design: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q031 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During ergonomics planning, job rotation is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm job rotation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q032 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to musculoskeletal risk under Ergonomics. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Musculoskeletal risk in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q033 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying lifting limits within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Lifting limits: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q034 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on workstation design in Ergonomics. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm workstation design controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q035 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Job rotation — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about job rotation in Ergonomics is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Job rotation in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q036 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Musculoskeletal risk — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During ergonomics planning, musculoskeletal risk is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Musculoskeletal risk: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q037 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Lifting limits — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to lifting limits under Ergonomics. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Ergonomics includes transparent documentation and follow-up to confirm lifting limits controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D8-Q038 - **Pack:** cih - **Type:** question - **Domain:** ergonomics - **Topic:** Workstation design — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying workstation design within Ergonomics, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Workstation design in Ergonomics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q001 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels - **Difficulty:** Easy - **Review status:** accepted ### Stem BSL-2 laboratories typically handle agents associated with: ### Choices - A) Moderate potential hazard to personnel and environment with standard precautions plus limited access - B) No precautions - C) Only radiation sources - D) Outdoor construction only **Correct answer:** A ### Explanation BSL-2 requires trained personnel, PPE, and containment for moderate-risk biological agents per BMBL concepts. **References:** cdc-biosafety: CDC Biosafety (BMBL concepts) ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q002 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps handling - **Difficulty:** Medium - **Review status:** accepted ### Stem Engineering controls for sharps injuries include: ### Choices - A) Needleless systems and sharps disposal containers at point of use - B) Recapping needles routinely by hand - C) Open blades in pockets - D) No training **Correct answer:** A ### Explanation OSHA bloodborne pathogens standard emphasizes safer devices and immediate disposal to reduce needlestick risk. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q003 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens - **Difficulty:** Medium - **Review status:** accepted ### Stem An exposure control plan for bloodborne pathogens must be: ### Choices - A) Written, updated annually, and available to employees - B) Verbal only - C) Hidden from employees - D) Optional for all employers **Correct answer:** A ### Explanation OSHA 1910.1030 requires a written plan covering exposure determination, controls, Hep B vaccination offer, and post-exposure follow-up. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q004 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biological cabinet - **Difficulty:** Hard - **Review status:** accepted ### Stem A Class II biological safety cabinet protects by: ### Choices - A) HEPA-filtered downward laminar airflow containing aerosols within the work zone - B) Heating samples to 500°F always - C) Measuring noise only - D) Replacing hand washing **Correct answer:** A ### Explanation BSCs contain microbiological aerosols, protecting worker, product, and environment depending on class/type. **References:** cdc-biosafety: CDC Biosafety (BMBL concepts) ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q005 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Autoclave validation - **Difficulty:** Medium - **Review status:** accepted ### Stem Sterilization assurance for autoclaves often includes: ### Choices - A) Biological indicators and periodic spore testing - B) Color of lab coats only - C) No records - D) Visual inspection alone always sufficient **Correct answer:** A ### Explanation Chemical and biological indicators verify cycle parameters achieved sterility conditions. **References:** cdc-biosafety: CDC Biosafety (BMBL concepts) ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q006 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Mold assessment - **Difficulty:** Easy - **Review status:** accepted ### Stem Investigating building-related moisture and mold growth should start with: ### Choices - A) Identifying and correcting moisture sources - B) Painting over growth without remediation - C) Ignoring occupant symptoms - D) Increasing humidity **Correct answer:** A ### Explanation Without moisture control, remediation fails; IH response includes source control, cleaning, and communication. **References:** cdc-biosafety: CDC Biosafety (BMBL concepts) ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q007 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Vaccination - **Difficulty:** Hard - **Review status:** accepted ### Stem Offering Hepatitis B vaccination to at-risk employees with reasonable cost and at appropriate times is required under: ### Choices - A) OSHA bloodborne pathogens standard for covered exposure determinations - B) Optional only with no documentation - C) Hearing conservation standard only - D) Fire brigade standard exclusively **Correct answer:** A ### Explanation Employers must offer Hep B series to employees with occupational exposure unless previously vaccinated or document declination. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q008 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying biosafety levels within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Biosafety levels in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q009 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on sharps in Biohazards. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sharps: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q010 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about bloodborne pathogens in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm bloodborne pathogens controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q011 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During biohazards planning, ventilation for labs is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation for labs in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q012 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to biosafety levels under Biohazards. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Biosafety levels: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q013 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying sharps within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm sharps controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q014 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on bloodborne pathogens in Biohazards. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Bloodborne pathogens in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q015 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about ventilation for labs in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ventilation for labs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q016 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During biohazards planning, biosafety levels is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm biosafety levels controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q017 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to sharps under Biohazards. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Sharps in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q018 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying bloodborne pathogens within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Bloodborne pathogens: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q019 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on ventilation for labs in Biohazards. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm ventilation for labs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q020 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about biosafety levels in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Biosafety levels in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q021 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During biohazards planning, sharps is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sharps: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q022 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to bloodborne pathogens under Biohazards. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm bloodborne pathogens controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q023 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying ventilation for labs within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation for labs in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q024 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on biosafety levels in Biohazards. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Biosafety levels: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q025 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about sharps in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm sharps controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q026 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During biohazards planning, bloodborne pathogens is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Bloodborne pathogens in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q027 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to ventilation for labs under Biohazards. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ventilation for labs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q028 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying biosafety levels within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm biosafety levels controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q029 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on sharps in Biohazards. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Sharps in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q030 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about bloodborne pathogens in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Bloodborne pathogens: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q031 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During biohazards planning, ventilation for labs is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm ventilation for labs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q032 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to biosafety levels under Biohazards. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Biosafety levels in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q033 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying sharps within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Sharps: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q034 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on bloodborne pathogens in Biohazards. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm bloodborne pathogens controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q035 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Ventilation for labs — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about ventilation for labs in Biohazards is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation for labs in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q036 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Biosafety levels — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During biohazards planning, biosafety levels is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Biosafety levels: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q037 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Sharps — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to sharps under Biohazards. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Biohazards includes transparent documentation and follow-up to confirm sharps controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D9-Q038 - **Pack:** cih - **Type:** question - **Domain:** biohazards - **Topic:** Bloodborne pathogens — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying bloodborne pathogens within Biohazards, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Bloodborne pathogens in Biohazards requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q001 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA - **Difficulty:** Easy - **Review status:** accepted ### Stem ALARA in radiation protection means keeping exposures: ### Choices - A) As low as reasonably achievable - B) As high as possible - C) Unmeasured - D) Equal to background only always **Correct answer:** A ### Explanation ALARA applies social and economic factors to minimize dose below regulatory limits. **References:** nrc-radiation: NRC 10 CFR Part 20 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q002 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation - **Difficulty:** Medium - **Review status:** accepted ### Stem Industrial microwave seal leakage surveys address primarily: ### Choices - A) Non-ionizing RF exposure from damaged door seals - B) Alpha particle contamination - C) Cadmium fume - D) Silica dust only **Correct answer:** A ### Explanation Microwave ovens in industrial settings may require leakage checks; RF is non-ionizing unlike gamma sources. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q003 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry - **Difficulty:** Medium - **Review status:** accepted ### Stem Personnel dosimeters for ionizing radiation measure: ### Choices - A) Occupational dose to workers over a wear period - B) Noise TWA - C) VOC ppm - D) WBGT only **Correct answer:** A ### Explanation Badge or electronic dosimeters track shallow and deep dose equivalent for compliance and ALARA programs. **References:** nrc-radiation: NRC 10 CFR Part 20 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q004 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Laser safety - **Difficulty:** Hard - **Review status:** accepted ### Stem Class 3B or 4 lasers require controls including: ### Choices - A) Administrative controls, protective eyewear, and beam containment - B) No eyewear ever - C) Open beam viewing encouraged - D) Only hearing protection **Correct answer:** A ### Explanation High-power lasers pose eye and skin hazards; ANSI laser safety concepts define control measures by class. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q005 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Contamination survey - **Difficulty:** Medium - **Review status:** accepted ### Stem After handling unsealed radioactive material, frisking workers and surfaces checks for: ### Choices - A) Removable surface contamination - B) Blood glucose - C) CO2 only - D) Ergonomic risk **Correct answer:** A ### Explanation Contamination surveys prevent spread and unintended intake of radioactive material. **References:** nrc-radiation: NRC 10 CFR Part 20 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q006 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Time-distance-shielding - **Difficulty:** Easy - **Review status:** accepted ### Stem Reducing time near a fixed gamma source lowers dose because dose is proportional to: ### Choices - A) Exposure time at a given rate - B) Worker height only - C) Number of SDS sheets - D) Ambient humidity exclusively **Correct answer:** A ### Explanation Dose = dose rate × time; minimizing duration, increasing distance, and shielding are fundamental control tools. **References:** nrc-radiation: NRC 10 CFR Part 20 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q007 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** UV curing - **Difficulty:** Hard - **Review status:** accepted ### Stem UV curing lamps in manufacturing pose primarily: ### Choices - A) Non-ionizing UV skin and eye hazards requiring shielding and PPE - B) Neutron activation - C) No hazards - D) Hearing loss exclusively **Correct answer:** A ### Explanation UV sources can cause erythema and photokeratitis; enclosures, interlocks, and protective eyewear are typical controls. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q008 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying alara within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation ALARA in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q009 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on dosimetry in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dosimetry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q010 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about non-ionizing radiation in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm non-ionizing radiation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q011 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, radioactive materials control is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Radioactive materials control in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q012 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to alara under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to ALARA: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q013 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying dosimetry within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm dosimetry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q014 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on non-ionizing radiation in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Non-ionizing radiation in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q015 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about radioactive materials control in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Radioactive materials control: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q016 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, alara is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm alara controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q017 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to dosimetry under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dosimetry in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q018 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying non-ionizing radiation within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Non-ionizing radiation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q019 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on radioactive materials control in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm radioactive materials control controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q020 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about alara in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation ALARA in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q021 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, dosimetry is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dosimetry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q022 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to non-ionizing radiation under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm non-ionizing radiation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q023 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying radioactive materials control within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Radioactive materials control in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q024 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on alara in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to ALARA: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q025 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about dosimetry in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm dosimetry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q026 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, non-ionizing radiation is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Non-ionizing radiation in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q027 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to radioactive materials control under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Radioactive materials control: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q028 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying alara within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm alara controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q029 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on dosimetry in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Dosimetry in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q030 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about non-ionizing radiation in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Non-ionizing radiation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q031 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, radioactive materials control is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm radioactive materials control controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q032 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to alara under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation ALARA in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q033 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying dosimetry within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Dosimetry: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q034 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on non-ionizing radiation in Radiation (Industrial Hygiene). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm non-ionizing radiation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q035 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Radioactive materials control — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about radioactive materials control in Radiation (Industrial Hygiene) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Radioactive materials control in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q036 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** ALARA — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During radiation (industrial hygiene) planning, alara is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to ALARA: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q037 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Dosimetry — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to dosimetry under Radiation (Industrial Hygiene). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Radiation (Industrial Hygiene) includes transparent documentation and follow-up to confirm dosimetry controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D10-Q038 - **Pack:** cih - **Type:** question - **Domain:** radiation-ih - **Topic:** Non-ionizing radiation — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying non-ionizing radiation within Radiation (Industrial Hygiene), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Non-ionizing radiation in Radiation (Industrial Hygiene) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q001 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization - **Difficulty:** Medium - **Review status:** accepted ### Stem Risk characterization in IH integrates hazard identification, exposure assessment, and: ### Choices - A) Dose-response / toxicity information to estimate likelihood and severity - B) Product marketing - C) Stock price - D) Office layout color **Correct answer:** A ### Explanation Characterization expresses what is known about risk magnitude and uncertainty for decision-makers. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q002 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty communication - **Difficulty:** Hard - **Review status:** accepted ### Stem When presenting sampling results near a decision limit, the IH should: ### Choices - A) Discuss analytical uncertainty, sample representativeness, and conservative assumptions - B) Hide confidence intervals - C) Guarantee zero risk - D) Avoid written records **Correct answer:** A ### Explanation Transparent communication of limitations helps stakeholders make informed control decisions. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q003 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding - **Difficulty:** Medium - **Review status:** accepted ### Stem Control banding tools group chemicals by hazard and exposure potential to suggest: ### Choices - A) Initial control strategies when quantitative data are limited - B) Final legal determinations without review - C) Elimination of SDS - D) No training **Correct answer:** A ### Explanation Control banding supports preliminary decisions for small businesses; validation with measurements remains important. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q004 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder engagement - **Difficulty:** Easy - **Review status:** accepted ### Stem Explaining sampling plans to affected employees before monitoring improves: ### Choices - A) Trust and cooperation with valid personal samples - B) Need for secrecy - C) Sample tampering incentives - D) Regulatory exemptions automatically **Correct answer:** A ### Explanation Communication reduces anxiety and helps workers wear samplers correctly for representative data. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q005 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Margin of safety - **Difficulty:** Hard - **Review status:** accepted ### Stem Applying a margin of safety below a published occupational limit accounts for: ### Choices - A) Inter-individual variability and uncertainties in exposure estimates - B) Eliminating all PPE always - C) Higher production quotas only - D) Zero need for medical surveillance **Correct answer:** A ### Explanation Conservative targets acknowledge sensitive subpopulations and imperfect exposure data. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q006 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Qualitative risk matrix - **Difficulty:** Medium - **Review status:** accepted ### Stem A risk matrix plotting severity vs likelihood is useful for: ### Choices - A) Prioritizing control resources across multiple hazards - B) Replacing all measurements mandatorily - C) Calculating noise dose - D) Autoclave cycles **Correct answer:** A ### Explanation Matrices visualize relative priority; they should be calibrated to site-specific context and updated with new data. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q007 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Community communication - **Difficulty:** Easy - **Review status:** accepted ### Stem When plant neighbors express odor concerns, initial IH response should include: ### Choices - A) Listening, documenting complaints, and evaluating potential sources with appropriate monitoring - B) Ignoring complaints - C) Immediate plant closure without investigation - D) Deleting records **Correct answer:** A ### Explanation Structured community interaction supports credible investigation and corrective action if emissions are confirmed. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q008 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying risk characterization within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Risk characterization in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q009 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on uncertainty in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Uncertainty: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q010 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about stakeholder communication in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm stakeholder communication controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q011 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During risk assessment and communication planning, control banding is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Control banding in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q012 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to risk characterization under Risk Assessment and Communication. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Risk characterization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q013 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying uncertainty within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm uncertainty controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q014 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on stakeholder communication in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Stakeholder communication in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q015 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about control banding in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Control banding: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q016 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During risk assessment and communication planning, risk characterization is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm risk characterization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q017 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to uncertainty under Risk Assessment and Communication. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Uncertainty in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q018 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying stakeholder communication within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Stakeholder communication: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q019 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on control banding in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm control banding controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q020 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about risk characterization in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Risk characterization in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q021 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During risk assessment and communication planning, uncertainty is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Uncertainty: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q022 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to stakeholder communication under Risk Assessment and Communication. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm stakeholder communication controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q023 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying control banding within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Control banding in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q024 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on risk characterization in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Risk characterization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q025 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about uncertainty in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm uncertainty controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q026 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During risk assessment and communication planning, stakeholder communication is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Stakeholder communication in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q027 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to control banding under Risk Assessment and Communication. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Control banding: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q028 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying risk characterization within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm risk characterization controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q029 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on uncertainty in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Uncertainty in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q030 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about stakeholder communication in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Stakeholder communication: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q031 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During risk assessment and communication planning, control banding is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm control banding controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q032 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to risk characterization under Risk Assessment and Communication. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Risk characterization in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q033 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying uncertainty within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Uncertainty: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q034 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on stakeholder communication in Risk Assessment and Communication. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm stakeholder communication controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q035 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Control banding — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about control banding in Risk Assessment and Communication is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Control banding in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q036 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Risk characterization — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During risk assessment and communication planning, risk characterization is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Risk characterization: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q037 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Uncertainty — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to uncertainty under Risk Assessment and Communication. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Risk Assessment and Communication includes transparent documentation and follow-up to confirm uncertainty controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D11-Q038 - **Pack:** cih - **Type:** question - **Domain:** risk-assessment-communication - **Topic:** Stakeholder communication — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying stakeholder communication within Risk Assessment and Communication, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Stakeholder communication in Risk Assessment and Communication requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q001 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS sections - **Difficulty:** Easy - **Review status:** accepted ### Stem Safety Data Sheets under GHS-aligned HazCom include standardized sections such as identification, hazards, composition, and: ### Choices - A) Exposure controls / personal protection and toxicological information - B) Employee birthdays - C) Stock ticker symbols - D) Only marketing slogans **Correct answer:** A ### Explanation OSHA HazCom 2012 adopts GHS 16-section SDS format for consistent hazard communication. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q002 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Label elements - **Difficulty:** Medium - **Review status:** accepted ### Stem Container labels must include product identifier, signal word, pictograms, hazard statements, precautionary statements, and: ### Choices - A) Supplier contact information - B) Employee SSN - C) Random colors only - D) Nothing if stored one day **Correct answer:** A ### Explanation Labels provide immediate hazard recognition; workplace labeling systems must be consistent with SDS. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q003 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training requirements - **Difficulty:** Medium - **Review status:** accepted ### Stem HazCom training must cover how to read SDS and labels, physical and health hazards, and: ### Choices - A) Protective measures and employer-specific procedures - B) Only fire drill dates - C) Payroll schedules exclusively - D) No hands-on examples **Correct answer:** A ### Explanation Effective training ties GHS elements to site chemical inventory and safe work procedures. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q004 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Secondary containers - **Difficulty:** Hard - **Review status:** accepted ### Stem Transferring a chemical to a secondary container requires labeling unless: ### Choices - A) It is for immediate use by the same employee who performed the transfer - B) Never — all transfers need full SDS binders attached - C) The container is glass - D) The chemical is water always exempt **Correct answer:** A ### Explanation OSHA allows immediate-use exemption but otherwise workplace labels must convey hazard information. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q005 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Trade secrets - **Difficulty:** Medium - **Review status:** accepted ### Stem When a manufacturer withholds exact composition as trade secret, the SDS still must provide: ### Choices - A) Hazard information and release procedures for medical emergencies - B) No health data - C) Only a phone number with no info - D) Elimination of labels **Correct answer:** A ### Explanation Trade secret claims must not block emergency treatment information; disclosure rules apply to health professionals. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q006 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Program audit - **Difficulty:** Easy - **Review status:** accepted ### Stem A written hazard communication program describes how the employer meets labeling, SDS access, inventory, and: ### Choices - A) Employee training requirements - B) Cafeteria menu - C) Vacation policy only - D) IT password rules exclusively **Correct answer:** A ### Explanation The written program is the backbone tying chemical inventory to accessible SDS and training records. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q007 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Multi-employer sites - **Difficulty:** Hard - **Review status:** accepted ### Stem On multi-contractor sites, host employers should coordinate HazCom by: ### Choices - A) Sharing information on known hazardous chemicals present and precautionary measures - B) Hiding all SDS from contractors - C) Assuming contractors need no information - D) Removing all labels **Correct answer:** A ### Explanation Host/controlling employer obligations include communicating site-specific chemical hazards to contractors per OSHA guidance concepts. **References:** osha-1910-general: OSHA 29 CFR 1910 ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q008 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying sds within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation SDS in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q009 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on labeling in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q010 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about training in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm training controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q011 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During hazard communication programs planning, written program is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Written program in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q012 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to sds under Hazard Communication Programs. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to SDS: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q013 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying labeling within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q014 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on training in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Training in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q015 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about written program in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Written program: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q016 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During hazard communication programs planning, sds is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm sds controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q017 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to labeling under Hazard Communication Programs. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Labeling in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q018 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying training within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Training: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q019 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on written program in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm written program controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q020 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about sds in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation SDS in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q021 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During hazard communication programs planning, labeling is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q022 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to training under Hazard Communication Programs. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm training controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q023 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying written program within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Written program in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q024 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on sds in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to SDS: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q025 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about labeling in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q026 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During hazard communication programs planning, training is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Training in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q027 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to written program under Hazard Communication Programs. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Written program: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q028 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying sds within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm sds controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q029 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on labeling in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Labeling in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q030 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about training in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Training: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q031 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During hazard communication programs planning, written program is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm written program controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q032 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to sds under Hazard Communication Programs. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation SDS in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q033 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying labeling within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q034 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on training in Hazard Communication Programs. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm training controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q035 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Written program — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about written program in Hazard Communication Programs is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Written program in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q036 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** SDS — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During hazard communication programs planning, sds is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to SDS: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q037 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Labeling — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to labeling under Hazard Communication Programs. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Hazard Communication Programs includes transparent documentation and follow-up to confirm labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D12-Q038 - **Pack:** cih - **Type:** question - **Domain:** hazard-communication-programs - **Topic:** Training — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying training within Hazard Communication Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Training in Hazard Communication Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q001 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Cohort vs case-control - **Difficulty:** Medium - **Review status:** accepted ### Stem A case-control study starts with: ### Choices - A) Defined disease/outcome groups and looks back for exposures - B) Healthy cohort followed forward only always - C) Randomized treatment assignment mandatorily - D) Laboratory animal dosing only **Correct answer:** A ### Explanation Case-control designs compare exposure history between cases and controls; efficient for rare outcomes. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q002 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding - **Difficulty:** Hard - **Review status:** accepted ### Stem Smoking confounds many occupational cancer studies because it: ### Choices - A) Is associated with both employment in some industries and lung cancer independently of the occupational agent - B) Eliminates all bias automatically - C) Is never measured - D) Replaces exposure assessment **Correct answer:** A ### Explanation Confounders distort exposure-disease associations; stratification or multivariable adjustment may be needed. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q003 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance - **Difficulty:** Easy - **Review status:** accepted ### Stem A p-value below a chosen alpha (e.g., 0.05) suggests: ### Choices - A) The observed association is unlikely under the null hypothesis, given model assumptions - B) The effect is clinically important automatically - C) No further study needed ever - D) Zero exposure occurred **Correct answer:** A ### Explanation Statistical significance does not imply causation or practical importance; effect size and context matter. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q004 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Incidence vs prevalence - **Difficulty:** Medium - **Review status:** accepted ### Stem Prevalence measures existing cases at a point in time, while incidence measures: ### Choices - A) New cases occurring over a defined period - B) Only deaths - C) Only exposures - D) Laboratory LOD **Correct answer:** A ### Explanation Incidence rates support etiologic inference; prevalence reflects duration and survival as well as new disease. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q005 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Selection bias - **Difficulty:** Hard - **Review status:** accepted ### Stem Healthy worker effect can bias occupational cohort studies by: ### Choices - A) Excluding less healthy individuals from employment, underestimating risk - B) Increasing risk estimates always - C) Eliminating need for controls - D) Guaranteeing high exposure **Correct answer:** A ### Explanation Employed populations may be healthier than general population, attenuating observed relative risks. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q006 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confidence interval - **Difficulty:** Medium - **Review status:** accepted ### Stem A 95% confidence interval for relative risk that includes 1.0 indicates: ### Choices - A) The association is not statistically significant at the 5% level (for two-sided test) - B) Proof of no effect in population ever - C) Data are fraudulent - D) Exposure was zero **Correct answer:** A ### Explanation CI including null value aligns with non-significant findings; width reflects precision. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q007 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Cross-sectional limits - **Difficulty:** Easy - **Review status:** accepted ### Stem Cross-sectional surveys simultaneously measure exposure and disease, making them weak for: ### Choices - A) Establishing temporal sequence for causality - B) Describing current prevalence - C) Hypothesis generation - D) Planning further study **Correct answer:** A ### Explanation Without knowing which came first, cross-sectional data cannot firmly establish exposure preceded outcome. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q008 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Relative risk calculation - **Difficulty:** Medium - **Review status:** accepted ### Stem In a cohort study, 20 of 200 exposed workers and 8 of 800 unexposed workers developed illness. What is the approximate relative risk (RR)? ### Choices - A) 5.0 - B) 10.0 - C) 15.0 - D) 10.0 **Correct answer:** B ### Explanation Risk among exposed = 20/200 = 10.0%. Risk among unexposed = 8/800 = 1.0%. RR = 0.1000/0.0100 ≈ 10.0. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q009 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Relative risk calculation - **Difficulty:** Medium - **Review status:** accepted ### Stem In a cohort study, 5 of 100 exposed workers and 4 of 400 unexposed workers developed illness. What is the approximate relative risk (RR)? ### Choices - A) 2.5 - B) 5.0 - C) 7.5 - D) 5.0 **Correct answer:** B ### Explanation Risk among exposed = 5/100 = 5.0%. Risk among unexposed = 4/400 = 1.0%. RR = 0.0500/0.0100 ≈ 5.0. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q010 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Relative risk calculation - **Difficulty:** Medium - **Review status:** accepted ### Stem In a cohort study, 10 of 50 exposed workers and 19 of 950 unexposed workers developed illness. What is the approximate relative risk (RR)? ### Choices - A) 5.0 - B) 10.0 - C) 15.0 - D) 20.0 **Correct answer:** B ### Explanation Risk among exposed = 10/50 = 20.0%. Risk among unexposed = 19/950 = 2.0%. RR = 0.2000/0.0200 ≈ 10.0. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q011 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying study designs within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Study designs in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q012 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on bias in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Bias: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q013 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about confounding in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm confounding controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q014 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During epidemiology and biostatistics planning, statistical significance is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Statistical significance in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q015 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to study designs under Epidemiology and Biostatistics. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Study designs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q016 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying bias within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm bias controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q017 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on confounding in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Confounding in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q018 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about statistical significance in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Statistical significance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q019 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During epidemiology and biostatistics planning, study designs is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm study designs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q020 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to bias under Epidemiology and Biostatistics. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Bias in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q021 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying confounding within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Confounding: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q022 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on statistical significance in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm statistical significance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q023 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about study designs in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Study designs in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q024 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During epidemiology and biostatistics planning, bias is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Bias: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q025 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to confounding under Epidemiology and Biostatistics. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm confounding controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q026 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying statistical significance within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Statistical significance in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q027 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on study designs in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Study designs: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q028 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about bias in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm bias controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q029 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During epidemiology and biostatistics planning, confounding is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Confounding in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q030 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to statistical significance under Epidemiology and Biostatistics. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Statistical significance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q031 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying study designs within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm study designs controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q032 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on bias in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Bias in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q033 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about confounding in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Confounding: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q034 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During epidemiology and biostatistics planning, statistical significance is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm statistical significance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q035 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Study designs — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to study designs under Epidemiology and Biostatistics. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Study designs in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q036 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Bias — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying bias within Epidemiology and Biostatistics, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Bias: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q037 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Confounding — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on confounding in Epidemiology and Biostatistics. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Epidemiology and Biostatistics includes transparent documentation and follow-up to confirm confounding controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D13-Q038 - **Pack:** cih - **Type:** question - **Domain:** epidemiology-biostatistics - **Topic:** Statistical significance — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about statistical significance in Epidemiology and Biostatistics is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Statistical significance in Epidemiology and Biostatistics requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q001 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline monitoring - **Difficulty:** Medium - **Review status:** accepted ### Stem Fenceline ambient monitoring around an industrial plant helps evaluate: ### Choices - A) Off-site transport of pollutants toward neighboring communities - B) Interior ergonomic risk only - C) Employee payroll - D) Indoor mold exclusively at plant **Correct answer:** A ### Explanation Perimeter monitoring supports community exposure assessment and regulatory compliance concepts for air toxics. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q002 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory - **Difficulty:** Easy - **Review status:** accepted ### Stem An emissions inventory lists sources, pollutants, and release rates primarily to: ### Choices - A) Support permitting, modeling, and community risk communication - B) Replace all stack testing always - C) Hide releases from agencies - D) Measure hearing loss **Correct answer:** A ### Explanation Inventories aggregate point and fugitive sources for regulatory reporting and risk analysis. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q003 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Dispersion modeling - **Difficulty:** Hard - **Review status:** accepted ### Stem Gaussian plume models require inputs such as stack height, exit velocity, meteorology, and: ### Choices - A) Source emission rate - B) Employee shoe size - C) Office carpet color - D) Audiogram results **Correct answer:** A ### Explanation Air quality models estimate downwind concentrations from source strength and atmospheric stability. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q004 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement - **Difficulty:** Medium - **Review status:** accepted ### Stem Transparent public meetings after a chemical release should provide: ### Choices - A) Known facts, health precautions, ongoing sampling plans, and contact points - B) Speculation as confirmed facts - C) No data until litigation ends only - D) Discouraging questions **Correct answer:** A ### Explanation Effective risk communication balances honesty about uncertainties with actionable protective guidance. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q005 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Indoor air in schools - **Difficulty:** Easy - **Review status:** accepted ### Stem Investigating IAQ complaints in a school near industry includes checking HVAC, pollutant pathways, and: ### Choices - A) Outdoor pollutant intrusion and relevant outdoor monitoring data - B) Only student grades - C) Eliminating all ventilation - D) Ignoring parent reports **Correct answer:** A ### Explanation Indoor exposures may reflect outdoor infiltration; coordinated outdoor/indoor sampling informs response. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q006 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Soil vapor intrusion - **Difficulty:** Hard - **Review status:** accepted ### Stem Vapor intrusion assessment evaluates whether subsurface contaminants migrate into buildings via: ### Choices - A) Diffusion/advection through cracks and utility penetrations - B) Only visible dust on desks - C) Radio waves - D) Employee lifting **Correct answer:** A ### Explanation Sub-slab sampling and pathway analysis determine need for mitigation systems. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q007 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Environmental justice - **Difficulty:** Medium - **Review status:** accepted ### Stem Considering cumulative burdens in nearby disadvantaged communities aligns with: ### Choices - A) Environmental justice principles in public health assessment - B) Avoiding all monitoring - C) Secret releases - D) Eliminating permits always **Correct answer:** A ### Explanation Multiple stressors may combine; engagement and targeted reduction of disproportionate impacts are policy goals. **References:** epa-air-toxics: EPA Air Toxics Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q008 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying ambient monitoring within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ambient monitoring in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q009 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on fenceline in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fenceline: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q010 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about community engagement in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm community engagement controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q011 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem During community and environmental exposure planning, emissions inventory is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emissions inventory in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q012 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to ambient monitoring under Community and Environmental Exposure. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ambient monitoring: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q013 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying fenceline within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm fenceline controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q014 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on community engagement in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Community engagement in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q015 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about emissions inventory in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Emissions inventory: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q016 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem During community and environmental exposure planning, ambient monitoring is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm ambient monitoring controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q017 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to fenceline under Community and Environmental Exposure. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Fenceline in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q018 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying community engagement within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Community engagement: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q019 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on emissions inventory in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm emissions inventory controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q020 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about ambient monitoring in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ambient monitoring in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q021 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem During community and environmental exposure planning, fenceline is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fenceline: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q022 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to community engagement under Community and Environmental Exposure. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm community engagement controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q023 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying emissions inventory within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emissions inventory in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q024 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on ambient monitoring in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ambient monitoring: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q025 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about fenceline in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm fenceline controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q026 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem During community and environmental exposure planning, community engagement is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Community engagement in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q027 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to emissions inventory under Community and Environmental Exposure. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Emissions inventory: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q028 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying ambient monitoring within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm ambient monitoring controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q029 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on fenceline in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Fenceline in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q030 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about community engagement in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Community engagement: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q031 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem During community and environmental exposure planning, emissions inventory is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm emissions inventory controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q032 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to ambient monitoring under Community and Environmental Exposure. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ambient monitoring in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q033 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying fenceline within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fenceline: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q034 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on community engagement in Community and Environmental Exposure. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm community engagement controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q035 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Emissions inventory — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about emissions inventory in Community and Environmental Exposure is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emissions inventory in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q036 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Ambient monitoring — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem During community and environmental exposure planning, ambient monitoring is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ambient monitoring: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q037 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Fenceline — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to fenceline under Community and Environmental Exposure. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Community and Environmental Exposure includes transparent documentation and follow-up to confirm fenceline controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D14-Q038 - **Pack:** cih - **Type:** question - **Domain:** community-environmental-exposure - **Topic:** Community engagement — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying community engagement within Community and Environmental Exposure, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Community engagement in Community and Environmental Exposure requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q001 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying skin contact within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Skin contact in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q002 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on protective gloves in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Protective gloves: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q003 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about surface wipe sampling in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm surface wipe sampling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q004 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During dermal exposure assessment planning, absorption routes is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Absorption routes in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q005 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to skin contact under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Skin contact: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q006 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying protective gloves within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm protective gloves controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q007 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on surface wipe sampling in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Surface wipe sampling in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q008 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about absorption routes in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Absorption routes: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q009 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During dermal exposure assessment planning, skin contact is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm skin contact controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q010 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to protective gloves under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Protective gloves in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q011 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying surface wipe sampling within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Surface wipe sampling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q012 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on absorption routes in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm absorption routes controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q013 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about skin contact in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Skin contact in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q014 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During dermal exposure assessment planning, protective gloves is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Protective gloves: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q015 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to surface wipe sampling under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm surface wipe sampling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q016 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying absorption routes within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Absorption routes in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q017 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on skin contact in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Skin contact: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q018 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about protective gloves in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm protective gloves controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q019 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During dermal exposure assessment planning, surface wipe sampling is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Surface wipe sampling in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q020 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to absorption routes under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Absorption routes: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q021 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying skin contact within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm skin contact controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q022 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on protective gloves in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Protective gloves in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q023 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about surface wipe sampling in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Surface wipe sampling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q024 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During dermal exposure assessment planning, absorption routes is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm absorption routes controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q025 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to skin contact under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Skin contact in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q026 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying protective gloves within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Protective gloves: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q027 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on surface wipe sampling in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm surface wipe sampling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q028 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about absorption routes in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Absorption routes in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q029 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During dermal exposure assessment planning, skin contact is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Skin contact: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q030 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to protective gloves under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm protective gloves controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q031 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying surface wipe sampling within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Surface wipe sampling in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q032 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on absorption routes in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Absorption routes: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q033 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about skin contact in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm skin contact controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q034 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During dermal exposure assessment planning, protective gloves is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Protective gloves in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q035 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Surface wipe sampling — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to surface wipe sampling under Dermal Exposure Assessment. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Surface wipe sampling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q036 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Absorption routes — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying absorption routes within Dermal Exposure Assessment, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Dermal Exposure Assessment includes transparent documentation and follow-up to confirm absorption routes controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q037 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Skin contact — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on skin contact in Dermal Exposure Assessment. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Skin contact in Dermal Exposure Assessment requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D15-Q038 - **Pack:** cih - **Type:** question - **Domain:** dermal-exposure - **Topic:** Protective gloves — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about protective gloves in Dermal Exposure Assessment is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Protective gloves: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q001 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying legionella within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Legionella in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q002 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on mold/moisture in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mold/moisture: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q003 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about co/co₂ in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm co/co₂ controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q004 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During water quality and indoor air planning, ventilation rates is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation rates in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q005 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to legionella under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Legionella: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q006 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying mold/moisture within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm mold/moisture controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q007 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on co/co₂ in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation CO/CO₂ in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q008 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about ventilation rates in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ventilation rates: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q009 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During water quality and indoor air planning, legionella is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm legionella controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q010 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to mold/moisture under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mold/moisture in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q011 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying co/co₂ within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to CO/CO₂: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q012 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on ventilation rates in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm ventilation rates controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q013 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about legionella in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Legionella in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q014 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During water quality and indoor air planning, mold/moisture is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mold/moisture: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q015 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to co/co₂ under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm co/co₂ controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q016 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying ventilation rates within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation rates in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q017 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on legionella in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Legionella: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q018 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about mold/moisture in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm mold/moisture controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q019 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During water quality and indoor air planning, co/co₂ is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation CO/CO₂ in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q020 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to ventilation rates under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ventilation rates: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q021 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying legionella within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm legionella controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q022 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on mold/moisture in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mold/moisture in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q023 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about co/co₂ in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to CO/CO₂: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q024 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During water quality and indoor air planning, ventilation rates is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm ventilation rates controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q025 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to legionella under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Legionella in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q026 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying mold/moisture within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mold/moisture: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q027 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on co/co₂ in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm co/co₂ controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q028 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about ventilation rates in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Ventilation rates in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q029 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During water quality and indoor air planning, legionella is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Legionella: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q030 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to mold/moisture under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm mold/moisture controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q031 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying co/co₂ within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation CO/CO₂ in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q032 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on ventilation rates in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Ventilation rates: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q033 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about legionella in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm legionella controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q034 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During water quality and indoor air planning, mold/moisture is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Mold/moisture in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q035 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** CO/CO₂ — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to co/co₂ under Water Quality and Indoor Air. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to CO/CO₂: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q036 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Ventilation rates — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying ventilation rates within Water Quality and Indoor Air, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Water Quality and Indoor Air includes transparent documentation and follow-up to confirm ventilation rates controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q037 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Legionella — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on legionella in Water Quality and Indoor Air. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Legionella in Water Quality and Indoor Air requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D16-Q038 - **Pack:** cih - **Type:** question - **Domain:** water-quality-indoor-air - **Topic:** Mold/moisture — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about mold/moisture in Water Quality and Indoor Air is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Mold/moisture: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q001 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying chemical reactivity within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Chemical reactivity in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q002 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on process ventilation in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Process ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q003 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about emergency isolation in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm emergency isolation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q004 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During industrial process safety interface planning, ih-psm coordination is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation IH-PSM coordination in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q005 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to chemical reactivity under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Chemical reactivity: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q006 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying process ventilation within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm process ventilation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q007 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on emergency isolation in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emergency isolation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q008 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about ih-psm coordination in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to IH-PSM coordination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q009 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During industrial process safety interface planning, chemical reactivity is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm chemical reactivity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q010 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to process ventilation under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Process ventilation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q011 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying emergency isolation within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Emergency isolation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q012 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on ih-psm coordination in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm ih-psm coordination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q013 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about chemical reactivity in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Chemical reactivity in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q014 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During industrial process safety interface planning, process ventilation is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Process ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q015 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to emergency isolation under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm emergency isolation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q016 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying ih-psm coordination within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation IH-PSM coordination in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q017 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on chemical reactivity in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Chemical reactivity: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q018 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about process ventilation in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm process ventilation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q019 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During industrial process safety interface planning, emergency isolation is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emergency isolation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q020 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to ih-psm coordination under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to IH-PSM coordination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q021 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying chemical reactivity within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm chemical reactivity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q022 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on process ventilation in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Process ventilation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q023 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about emergency isolation in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Emergency isolation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q024 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During industrial process safety interface planning, ih-psm coordination is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm ih-psm coordination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q025 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to chemical reactivity under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Chemical reactivity in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q026 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying process ventilation within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Process ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q027 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on emergency isolation in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm emergency isolation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q028 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about ih-psm coordination in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation IH-PSM coordination in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q029 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During industrial process safety interface planning, chemical reactivity is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Chemical reactivity: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q030 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to process ventilation under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm process ventilation controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q031 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying emergency isolation within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Emergency isolation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q032 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on ih-psm coordination in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to IH-PSM coordination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q033 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about chemical reactivity in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm chemical reactivity controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q034 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During industrial process safety interface planning, process ventilation is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Process ventilation in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q035 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Emergency isolation — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to emergency isolation under Industrial Process Safety Interface. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Emergency isolation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q036 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** IH-PSM coordination — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying ih-psm coordination within Industrial Process Safety Interface, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Industrial Process Safety Interface includes transparent documentation and follow-up to confirm ih-psm coordination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q037 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Chemical reactivity — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on chemical reactivity in Industrial Process Safety Interface. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Chemical reactivity in Industrial Process Safety Interface requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D17-Q038 - **Pack:** cih - **Type:** question - **Domain:** industrial-process-safety - **Topic:** Process ventilation — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about process ventilation in Industrial Process Safety Interface is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Process ventilation: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q001 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying medical surveillance within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Medical surveillance in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q002 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on fit testing in Occupational Health Programs. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fit testing: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q003 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about wellness integration in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm wellness integration controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q004 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During occupational health programs planning, return-to-work is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Return-to-work in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q005 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to medical surveillance under Occupational Health Programs. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Medical surveillance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q006 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying fit testing within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm fit testing controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q007 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on wellness integration in Occupational Health Programs. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Wellness integration in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q008 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about return-to-work in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Return-to-work: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q009 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During occupational health programs planning, medical surveillance is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm medical surveillance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q010 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to fit testing under Occupational Health Programs. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Fit testing in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q011 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying wellness integration within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Wellness integration: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q012 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on return-to-work in Occupational Health Programs. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm return-to-work controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q013 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about medical surveillance in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Medical surveillance in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q014 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During occupational health programs planning, fit testing is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fit testing: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q015 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to wellness integration under Occupational Health Programs. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm wellness integration controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q016 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying return-to-work within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Return-to-work in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q017 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on medical surveillance in Occupational Health Programs. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Medical surveillance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q018 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about fit testing in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm fit testing controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q019 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During occupational health programs planning, wellness integration is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Wellness integration in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q020 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to return-to-work under Occupational Health Programs. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Return-to-work: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q021 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying medical surveillance within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm medical surveillance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q022 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on fit testing in Occupational Health Programs. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Fit testing in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q023 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about wellness integration in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Wellness integration: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q024 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During occupational health programs planning, return-to-work is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm return-to-work controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q025 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to medical surveillance under Occupational Health Programs. Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Medical surveillance in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q026 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying fit testing within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fit testing: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q027 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on wellness integration in Occupational Health Programs. The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm wellness integration controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q028 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about return-to-work in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Return-to-work in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q029 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During occupational health programs planning, medical surveillance is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Medical surveillance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q030 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to fit testing under Occupational Health Programs. Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm fit testing controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q031 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying wellness integration within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Wellness integration in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q032 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on return-to-work in Occupational Health Programs. The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Return-to-work: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q033 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about medical surveillance in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm medical surveillance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q034 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During occupational health programs planning, fit testing is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Fit testing in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q035 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Wellness integration — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to wellness integration under Occupational Health Programs. Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Wellness integration: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q036 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Return-to-work — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying return-to-work within Occupational Health Programs, which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Occupational Health Programs includes transparent documentation and follow-up to confirm return-to-work controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q037 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Medical surveillance — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on medical surveillance in Occupational Health Programs. The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Medical surveillance in Occupational Health Programs requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D18-Q038 - **Pack:** cih - **Type:** question - **Domain:** occupational-health-programs - **Topic:** Fit testing — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about fit testing in Occupational Health Programs is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Fit testing: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q001 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying spill assessment within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Spill assessment in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q002 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on responder ppe in Emergency Response (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Responder PPE: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q003 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about air monitoring during incidents in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm air monitoring during incidents controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q004 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During emergency response (ih) planning, decontamination is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Decontamination in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q005 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to spill assessment under Emergency Response (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Spill assessment: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q006 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying responder ppe within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm responder ppe controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q007 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on air monitoring during incidents in Emergency Response (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Air monitoring during incidents in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q008 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about decontamination in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Decontamination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q009 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During emergency response (ih) planning, spill assessment is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm spill assessment controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q010 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to responder ppe under Emergency Response (IH). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Responder PPE in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q011 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying air monitoring during incidents within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Air monitoring during incidents: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q012 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on decontamination in Emergency Response (IH). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm decontamination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q013 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about spill assessment in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Spill assessment in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q014 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During emergency response (ih) planning, responder ppe is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Responder PPE: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q015 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to air monitoring during incidents under Emergency Response (IH). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm air monitoring during incidents controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q016 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying decontamination within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Decontamination in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q017 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on spill assessment in Emergency Response (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Spill assessment: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q018 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about responder ppe in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm responder ppe controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q019 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During emergency response (ih) planning, air monitoring during incidents is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Air monitoring during incidents in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q020 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to decontamination under Emergency Response (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Decontamination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q021 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying spill assessment within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm spill assessment controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q022 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on responder ppe in Emergency Response (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Responder PPE in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q023 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about air monitoring during incidents in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Air monitoring during incidents: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q024 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During emergency response (ih) planning, decontamination is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm decontamination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q025 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to spill assessment under Emergency Response (IH). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Spill assessment in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q026 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying responder ppe within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Responder PPE: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q027 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on air monitoring during incidents in Emergency Response (IH). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm air monitoring during incidents controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q028 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about decontamination in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Decontamination in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q029 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During emergency response (ih) planning, spill assessment is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Spill assessment: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q030 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to responder ppe under Emergency Response (IH). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm responder ppe controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q031 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying air monitoring during incidents within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Air monitoring during incidents in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q032 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on decontamination in Emergency Response (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Decontamination: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q033 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about spill assessment in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm spill assessment controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q034 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During emergency response (ih) planning, responder ppe is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Responder PPE in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q035 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Air monitoring during incidents — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to air monitoring during incidents under Emergency Response (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Air monitoring during incidents: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q036 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Decontamination — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying decontamination within Emergency Response (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in Emergency Response (IH) includes transparent documentation and follow-up to confirm decontamination controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q037 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Spill assessment — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on spill assessment in Emergency Response (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Spill assessment in Emergency Response (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D19-Q038 - **Pack:** cih - **Type:** question - **Domain:** emergency-response-ih - **Topic:** Responder PPE — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about responder ppe in Emergency Response (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Responder PPE: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q001 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying global oel concepts within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Global OEL concepts in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q002 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 1 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on harmonized labeling in International Standards (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Harmonized labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q003 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 1 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about cross-border compliance in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm cross-border compliance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q004 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 1 - **Difficulty:** Easy - **Review status:** accepted ### Stem During international standards (ih) planning, who/ilo guidance is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation WHO/ILO guidance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q005 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to global oel concepts under International Standards (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Global OEL concepts: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q006 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 2 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying harmonized labeling within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm harmonized labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q007 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 2 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on cross-border compliance in International Standards (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Cross-border compliance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q008 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 2 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about who/ilo guidance in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to WHO/ILO guidance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q009 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem During international standards (ih) planning, global oel concepts is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm global oel concepts controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q010 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 3 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to harmonized labeling under International Standards (IH). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Harmonized labeling in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q011 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 3 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying cross-border compliance within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cross-border compliance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q012 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 3 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on who/ilo guidance in International Standards (IH). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm who/ilo guidance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q013 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about global oel concepts in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Global OEL concepts in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q014 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 4 - **Difficulty:** Medium - **Review status:** accepted ### Stem During international standards (ih) planning, harmonized labeling is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Harmonized labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q015 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 4 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to cross-border compliance under International Standards (IH). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm cross-border compliance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q016 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 4 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying who/ilo guidance within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation WHO/ILO guidance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q017 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on global oel concepts in International Standards (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Global OEL concepts: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q018 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 5 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about harmonized labeling in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm harmonized labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q019 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 5 - **Difficulty:** Easy - **Review status:** accepted ### Stem During international standards (ih) planning, cross-border compliance is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Cross-border compliance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q020 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 5 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to who/ilo guidance under International Standards (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to WHO/ILO guidance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q021 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying global oel concepts within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm global oel concepts controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q022 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 6 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on harmonized labeling in International Standards (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Harmonized labeling in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q023 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 6 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about cross-border compliance in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cross-border compliance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q024 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 6 - **Difficulty:** Hard - **Review status:** accepted ### Stem During international standards (ih) planning, who/ilo guidance is evaluated. The priority action is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm who/ilo guidance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q025 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem An audit finding relates to global oel concepts under International Standards (IH). Corrective action should: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Global OEL concepts in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q026 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 7 - **Difficulty:** Medium - **Review status:** accepted ### Stem When applying harmonized labeling within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Harmonized labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q027 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 7 - **Difficulty:** Hard - **Review status:** accepted ### Stem A facility review focuses on cross-border compliance in International Standards (IH). The most defensible next step is: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm cross-border compliance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q028 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 7 - **Difficulty:** Easy - **Review status:** accepted ### Stem Which statement about who/ilo guidance in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation WHO/ILO guidance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q029 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem During international standards (ih) planning, global oel concepts is evaluated. The priority action is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Global OEL concepts: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q030 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 8 - **Difficulty:** Hard - **Review status:** accepted ### Stem An audit finding relates to harmonized labeling under International Standards (IH). Corrective action should: ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm harmonized labeling controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q031 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 8 - **Difficulty:** Easy - **Review status:** accepted ### Stem When applying cross-border compliance within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Cross-border compliance in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q032 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 8 - **Difficulty:** Medium - **Review status:** accepted ### Stem A facility review focuses on who/ilo guidance in International Standards (IH). The most defensible next step is: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to WHO/ILO guidance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q033 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem Which statement about global oel concepts in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm global oel concepts controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q034 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 9 - **Difficulty:** Easy - **Review status:** accepted ### Stem During international standards (ih) planning, harmonized labeling is evaluated. The priority action is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Harmonized labeling in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q035 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Cross-border compliance — scenario 9 - **Difficulty:** Medium - **Review status:** accepted ### Stem An audit finding relates to cross-border compliance under International Standards (IH). Corrective action should: ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Cross-border compliance: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q036 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** WHO/ILO guidance — scenario 9 - **Difficulty:** Hard - **Review status:** accepted ### Stem When applying who/ilo guidance within International Standards (IH), which approach best aligns with professional practice and public guidance? ### Choices - A) Document assumptions, communicate findings, and schedule follow-up verification - B) Close the issue without root-cause analysis - C) Withhold results from affected workers - D) Use proprietary prep content without citation **Correct answer:** A ### Explanation Professional practice in International Standards (IH) includes transparent documentation and follow-up to confirm who/ilo guidance controls remain effective. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q037 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Global OEL concepts — scenario 10 - **Difficulty:** Easy - **Review status:** accepted ### Stem A facility review focuses on global oel concepts in International Standards (IH). The most defensible next step is: ### Choices - A) Use documented, reference-backed methods and verify control effectiveness - B) Rely on undocumented assumptions without follow-up - C) Skip worker communication and training - D) Discard sampling or inspection records **Correct answer:** A ### Explanation Global OEL concepts in International Standards (IH) requires traceable data, appropriate public methods, and verification that controls perform as intended. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) --- ## CIH-D20-Q038 - **Pack:** cih - **Type:** question - **Domain:** international-standards-ih - **Topic:** Harmonized labeling — scenario 10 - **Difficulty:** Medium - **Review status:** accepted ### Stem Which statement about harmonized labeling in International Standards (IH) is supported by standard occupational health and safety practice? ### Choices - A) Prioritize elimination or engineering controls before administrative measures and PPE - B) Use PPE alone without assessing source controls - C) Defer all action until an injury occurs - D) Ignore applicable regulatory minimums **Correct answer:** A ### Explanation The hierarchy of controls applies to Harmonized labeling: reduce exposure at the source before relying on administrative measures or PPE alone. **References:** niosh-pub: NIOSH Occupational Health Guidance ### SME review - **Reviewer name:** - **Reviewer role:** - **Comments:** - **Recommended action:** (approve | revise | reject | hold | retire) - **Source adequacy:** - **Technical accuracy:** - **Clarity:** - **Disposition:** (accept | revise | reject | needs source verification) ---